R&S SMB100A, Operating Manual

Page: 118 / 528

Instrument Function
R&S
®
SMB100A
103 Operating Manual 1407.0806.32 ─ 21
manual control, the R&S SMB provides you with another possibility to shut the instru-
ment down or to reboot the system.
► To access the required settings, select "Setup > Environment > Shut Down".
Remote control commands:
●
:SYSTem:SHUTdown
on page 445
●
:SYSTem:REBoot
on page 444
●
see also
:SYSTem:RESTart
on page 444
5.2.3.11 Date and Time
The R&S SMB uses an internal real time clock to determine the date and time. It
adjusts the time and date to the timezone of your location automatically, by providing a
selection list of continents and cities.
The instrument records the time whenever you create or modify files on your instru-
ment or you use timed licences.
To access the required settings:
► Select "Setup > Environment > Date/Time" via the SETUP or MENU key.
The "Date / Time" dialog contains the time and data settings of the operating sys-
tem.
The parameters "Date" and "Time" are protected to prevent accidental changes.
To enable editing, unlock protection level 1, see
Chapter 5.2.3.17, "Protection" ,
on page 113.
Date
Displays the date set in the operating system in the format [dd.mm.yyyy].
Remote command:
:SYSTem:DATE
on page 445
Time
Displays the time set in the operating system in the format [hh.mm.ss].
The time setting corresponds to the selected Time Zone .
General Instrument Settings