Understanding the R&S SGMA-GUI Software
R&S
®
SGT100A
48
User Manual 1176.8674.02 ─ 07
6 Understanding the R&S SGMA-GUI Soft-
ware
This section gives a detailed description of the R&S
SGMA-GUI user interface and
information on how to work with it. The main panel with the overview of the configured
instruments is the operating and control interface for the whole program. From here, all
program functions are accessible. This panel is displayed after the start of R&S
SGMA-
GUI. The program always loads the previously used settings so you can continue your
work in the next session.
6.1 Operating Menu and Toolbar
On the top of the main panel, there are the menu bar, the toolbar and the info bar with
the corresponding "Info" button. Some of the functions are accessible via the toolbar
with its icons below the menu selection line.
The dialogs are built using elements, e.g., selection lists, checkboxes, and entry fields.
A blue frame indicates that the selected item is active. In a highlighted element, entries
can be made.
Table 6-1: Content of the operating menu
File
Setup
Help
About
Contents
Index
Shut down instruments and exit
Operating Menu and Toolbar