R&S SGT100A, User Manual

Page: 476 / 593

Remote Control Commands
R&S
®
SGT100A
445 User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:
CATalog?
Queries the available polynomial files in the default directory. Only files with the file
extension
*.iq_poly
are listed.
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Usage: Query only
Manual operation: See "Save/Recall Polynomial" on page 178
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:STORe
<Filename>
Saves the polynomial function as polynomial file.
Setting parameters:
<Filename> string
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Usage: Setting only
Manual operation: See "Save/Recall Polynomial" on page 178
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:LOAD
<Filename>
Loads the selected polynomial file.
Setting parameters:
<Filename> string
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Usage: Setting only
Manual operation: See "Save/Recall Polynomial" on page 178
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:CLIPping:FROM
<ClippingFrom>
Enables clipping and defines its limits.
Parameters:
<ClippingFrom> integer
Range:
0 to 100
*RST: 0
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
SOURce Subsystem