Remote Control Commands
R&S
®
SGT100A
323
User Manual 1176.8674.02 ─ 07
<DestinationFile>
string
String containing the path and name of the target file. The path
can be relative or absolute.
If
<DestinationFile>
is not specified, the
<SourceFile>
is
copied to the current directory, queried with the
Note:
Existing files with the same name in the destination direc-
tory are overwritten without an error message.
Usage:
Setting only
SCPI confirmed
:MMEMory:DATA
<Filename>, <BinaryBlock>
:MMEMory:DATA?
<Filename>
The setting command writes the block data
<BinaryBlock>
to the file identified by
<Filename>
.
Tip:
Use this command to read/transfer stored instrument settings or waveforms
directly from/to the instrument.
Parameters:
<BinaryBlock>
#<number><length_entry><data>
#
: Hash sign; always comes first in the binary block
<number>
: the first digit indicates how many digits the subse-
quent length entry has
<length_entry>
: indicates the number of subsequent bytes
<data>
: binary block data for the specified length.
For files with a size with more than nine digits (gigabytes), the
instrument allows the syntax
#(<Length>)
, where
<Length>
is the file size in decimal format.
Parameters for setting and query:
<Filename>
string
String parameter to specify the name of the file.
Example:
MMEMory:DATA '/var/user/test.txt',#15hallo
Writes the block data to the file
test.txt
.
The digit
1
indicates a length entry of one digit; the digit
5
indi-
cate a length of the binary data (
hallo
) in bytes.
MMEMory:DATA? '/var/user/test.txt'
Sends the data of the file
test.txt
from the instrument to the
controller in the form of a binary block.
Response: #15hallo
Usage:
SCPI confirmed
:MMEMory:DCATalog?
<path>
Returns the subdirectories of a particular directory.
MMEMory Subsystem
