Remote Control Commands
R&S
®
SGT100A
309
User Manual 1176.8674.02 ─ 07
Return values:
<ErrorCode>
integer > 0 (in decimal format)
An error occurred.
(For details see the Service Manual supplied with the instru-
ment).
0
No errors occurred.
Usage:
Query only
*WAI
Wait to continue
Prevents servicing of the subsequent commands until all preceding commands have
been executed and all signals have settled (see also command synchronization and
).
Usage:
Event
11.2 General Commands
:RESTart
Restarts the instrument.
Usage:
Event
:STANdby
Switches the instruments to stand by state. To return the instrument from standby to
ready state, send the SCPI command
.
Usage:
Event
:LOCK?
<LockRequestId>
Sends a lock request ID which uniquely identifies the controller to the instrument.
General Commands
