Signal Generator Settings
R&S
®
SGT100A
199
User Manual 1176.8674.02 ─ 07
Remote command:
7.7.3 Frequency/ Phase
The frequency and phase related settings are provided in the "Frequency/Phase" dia-
log.
► To access this dialog, select "SGMA-GUI > Instrument Name > RF > Frequency/
Phase".
Configuring the RF frequency
1. To change the RF frequency of the selected instrument, perform one of the follow-
ing:
a) Select "SGMA-GUI > Instrument Name > Frequency/Phase > Frequency" and
set the frequency at the RF output.
b) Select "SGMA-GUI main panel > Freq" and set the frequency.
The value includes possible frequency offset.
2. To enable frequency offset for example to consider the frequency shift of a down-
stream instrument, set the parameter "Frequency/Phase > Offset".
Changes of the RF frequency have an immediate effect on the output signal.
Frequency
Sets the RF frequency
at the RF output connector
of the selected instrument.
The displayed value does not consider an enabled frequency offset (
Remote command:
See
[:SOURce]:FREQuency[:CW|FIXed]
Offset
Sets a frequency offset.
RF Settings