R&S SGT100A, User Manual

Page: 207 / 593

Signal Generator Settings
R&S
®
SGT100A
176 User Manual 1176.8674.02 ─ 07
The instrument loads the configured values automatically and displays the shaping
function.
10. Select "Shaping Settings > Interpolation > Linear (Voltage)".
The display confirms the used interpolation.
Vin/Vmax, Vcc/Vmax/Power (dBm), Vcc (V) ...............................................................176
Goto, Edit, Save As, Save ...........................................................................................176
Fill Table Automatically .............................................................................................. 176
Vin/Vmax, Vcc/Vmax/Power (dBm), Vcc (V)
Sets the normalized values of the value pairs.
"Vin/Vmax, Vcc/Vmax"
Value pairs in "Envelope Voltage Adaptation > Manual/Auto Normal-
ized" mode.
"Power(dBm), Vcc(V)"
Value pairs in "Envelope Voltage Adaptation > Auto Power" mode.
Remote command:
n.a.
Goto, Edit, Save As, Save
Standard functions for editing of data lists.
Changed and unsaved values are displayed on a yellow background.
Remote command:
n.a.
Fill Table Automatically
Standard function for filling a table automatically with user-defined values.
"From / Range"
Defines the start line and number of the rows to be filled.
"Select Column to Fill"
Selects the respective value, including the unit.
"Start / End Value"
Default values corresponding to the selected column.
"Increment" Determines the step size.
"Fill" Fills the table.
Fill both columns and then save the list. Otherwise the entries are
lost.
7.5.7 Polynomial Coefficients Setting
The polynomial function is an analytical method to describe a shaping function.
Generation of Envelope Tracking Signals