R&S SGT100A, User Manual, Page: 107 / 593

Signal Generator Settings
R&S
®
SGT100A
76 User Manual 1176.8674.02 ─ 07
Table 7-1: System configuration modes
"Standard"
"ARB for Envelope Tracking"
When the "ARB for Envelope Tracking" mode is selected, a second ARB for the enve-
lope tracking is generated, which is output at the analog I/Q output. The ARB of the
first "Baseband" is then output at the RF output.
You can configure the envelope tracking signal in the "Arbitrary Waveform for ET" dia-
log. To access this dialog, click on the "Baseband 2 " block or select "SGMA-GUI >
Instrument Name > Baseband > ARB for Envelope Tracking". For a description of the
settings, see
Chapter 7.1.2, "ARB" , on page 77.
Baseband