Signal Generator Settings
R&S
®
SGT100A
77
User Manual 1176.8674.02 ─ 07
The ARB waveform for the envelope tracking ("Baseband 2") uses the same trigger,
marker and clock settings as the first ARB waveform ("Baseband").
For more information on the envelope tracking, see
Chapter 7.5, "Generation of Enve-
System Configuration
Selects the signal flow settings.
"Standard"
Selects the standard mode for the signal generator.
"ARB for Envelope Tracking"
When this mode is enabled, a second ARB signal is generated, which
is output at the analog output connectors. This ARB can be only used
for envelope tracking.
Remote command:
Apply
Triggers the instrument to adopt the selected configuration.
OK
Applies the configuration and exits the dialog.
7.1.2 ARB
The Arbitrary Waveform Generator (ARB) is an I/Q modulation source forming an inte-
gral part of the R&S
SGT. The ARB allows the playback and output of any externally
calculated modulation signals in the form of waveform files and the generation of multi-
carrier or multi-segment signals from waveform files.
Baseband
