Remote control commands
R&S
®
RTO6
2535
User Manual 1801.6687.02 ─ 05
●
RMS: RMS value of the long-term measurement results
●
STDDev: standard deviation of the long-term measurement results
Query parameters:
<MeasType>
FREQ | DUTY
Usage:
Query only
POWer:MODulation:SOURce
<Source>
Selects the source for the measurement.
Parameters:
<Source>
CURRENT | VOLTAGE
*RST:
VOLTAGE
POWer:MODulation:TYPE
<AnalysisType>
Sets the type of measurement.
Parameters:
<AnalysisType>
TURNON | CONT
*RST:
CONT
24.23.8
Dynamic ON resistance
............................................................................................2536
................................................................................2536
................................................................................ 2536
.......................................................................................2536
POWer:DONRes:RESult:RESistance?
........................................................................... 2536
POWer:DONRes:AUTO
<Autoscale>
Selects the scaling for the display of the results.
Parameters:
<Autoscale>
AUTO | MANUAL
*RST:
MANUAL
POWer:DONRes:AVG
<Average>
Enables/disables averaging.
Parameters:
<Average>
ON | OFF
*RST:
ON
Power analysis (option R&S
RTO6-K31)