Remote control commands
R&S
®
RTO6
2505
User Manual 1801.6687.02 ─ 05
Parameters:
<State>
ON | OFF
*RST:
ON
ADVJitter<m>:RESult:VERTical:JSContinuous
<State>
If enabled, the measurement scale of the jitter spectrum is set automatically.
If disabled you can manually set a
ADVJitter<m>:RESult:COMPonents<n>:
and a
ADVJitter<m>:RESult:COMPonents<n>:OFFSet
.
Suffix:
<m>
.
1..2
Parameters:
<State>
ON | OFF
*RST:
ON
ADVJitter<m>:RESult:VERTical:NHContinuous
<State>
If enabled, the measurement scale of the noise histogram and track is set automati-
cally.
If disabled you can manually set a
ADVJitter<m>:RESult:COMPonents<n>:
and a
ADVJitter<m>:RESult:COMPonents<n>:OFFSet
.
Suffix:
<m>
.
1..2
Parameters:
<State>
ON | OFF
*RST:
ON
ADVJitter<m>:RESult:VERTical:NSContinuous
<State>
If enabled, the measurement scale for the noise spectrum is set automatically.
If disabled you can manually set a
ADVJitter<m>:RESult:COMPonents<n>:
and a
ADVJitter<m>:RESult:COMPonents<n>:OFFSet
.
Suffix:
<m>
.
1..2
Parameters:
<State>
ON | OFF
*RST:
ON
ADVJitter<m>:RESult:COMPonents<n>:SCALe
<Scale>
Sets the scale for the selected component.
Jitter analysis and clock data recovery