Remote control commands
R&S
®
RTO6
2130
User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..3
Parameters:
<DataIdxOperator>
EQUal | LTHan | LETHan | GTHan | GETHan | INRange |
RANGe
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one data pattern
to be set with the corresponding
INRange | OORange
In range/Out of range: set the minimum and maximum value of
the range with
and
*RST:
INRange
TRIGger<m>:TBTO:DATA:IMAX
<DataIndexMax>
Sets the end value of the index range if
TRIGger<m>:TBTO:DATA:ICONdition
is
set to
INRange
or
OORange
.
Suffix:
<m>
.
1..3
Parameters:
<DataIndexMax>
Range:
1 to 0
Increment: 1
*RST:
0
TRIGger<m>:TBTO:DATA:IMIN
<DataIndexMin>
Specifies the index bit pattern, or sets the start value of a pattern range.
Suffix:
<m>
.
1..3
Parameters:
<DataIndexMin>
Range:
1 to 0
Increment: 1
*RST:
1
TRIGger<m>:TBTO:ERRor:CRC
<ErrorCRC>
Enables triggering on cyclic redundancy check (CRC) error.
Suffix:
<m>
.
1..3
Protocols
