Remote control commands
R&S
®
RTO6
2045
User Manual 1801.6687.02 ─ 05
TRIGger<m>:MDIO:DATA
<Data>
Defines the 16-bit payload data pattern (both in Clause
22 or Clause
45) or the
address pattern (in Clause
45, only) to trigger for; available only in trigger type "Data".
Parameters:
<Data>
24.17.17.3
Decode results
In all
BUS<m>:MDIO:WORD<n>
commands, the suffix <m> selects the serial bus and
the suffix <n> selects the word number in the decode table.
.............................................................................................2045
................................................................................ 2045
............................................................................... 2046
................................................................................ 2046
.................................................................................... 2046
............................................................................... 2047
............................................................................... 2047
................................................................................2048
.............................................................................2048
................................................................................2048
BUS<m>:MDIO:WCOunt?
Returns the word count for the selected serial bus, i.e. the number of words in the
present acquisition.
Suffix:
<m>
.
1..4
Return values:
<FrameCount>
Range:
0 to 100000
Increment: 1
*RST:
0
Usage:
Query only
BUS<m>:MDIO:WORD<n>:DATA?
Returns the 16-bit payload data field content (in Clause 22 or Clause 45), or the 16-bit
address field content (in Clause 45, only) in the present acquisition of the selected
word and the selected serial bus. The most significant bit (MSB) is transmitted first.
Suffix:
<m>
.
1..4
<n>
*
Return values:
<Data>
Protocols
