R&S RTO6, User Manual

Page: 1618 / 2677

Remote control commands
R&S
®
RTO6
1618 User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:WIDTh:RANGe <SearchName>,<RangeMode>
SEARch:TRIGger:WIDTh:RANGe? <SearchName>
Selects how the range of a pulse width is defined in relation to the width and delta (see
SEARch:TRIGger:WIDTh:WIDTh
on page 1618 and
SEARch:TRIGger:WIDTh:
DELTa
on page 1617).
Parameters:
<RangeMode> WITHin | OUTSide | SHORter | LONGer
WITHin
Triggers on pulses inside a given range. The range of the pulse
width is defined by "Width" and "
±
Delta".
OUTSide
Triggers on pulses outside a given range. The range definition is
the same as for "Within" range.
SHORter
Triggers on pulses shorter than the given "Width".
LONGer
Triggers on pulses longer than the given "Width".
*RST:
WITHin
Parameters for setting and query:
<SearchName> Search definition
Example: See Chapter 24.3.4.1, "Searching for a pulse of specified width" ,
on page 1266
Usage: Asynchronous command
SEARch:TRIGger:WIDTh:WIDTh <SearchName>,<Width>
SEARch:TRIGger:WIDTh:WIDTh? <SearchName>
For the ranges "Within" and "Outside", the width defines the center of a range which is
defined by the limits "
±
Delta".
For the ranges "Shorter" and "Longer", the width defines the maximum and minimum
pulse width, respectively.
The range is defined using
SEARch:TRIGger:WIDTh:RANGe
.
Parameters:
<Width> Range: 100E-12 to 864
Increment: 100E-9
*RST:
5E-9
Default unit: s
Parameters for setting and query:
<SearchName> Search definition
Example: See Chapter 24.3.4.1, "Searching for a pulse of specified width" ,
on page 1266
Usage: Asynchronous command
Search