Remote control commands
R&S
®
RTO6
1338
User Manual 1801.6687.02 ─ 05
DCLimit
Direct connection with 1 M
Ω
termination, passes both DC and
AC components.
AC
Connection with 1 M
Ω
termination, removes DC and very low-
frequency components.
CHANnel<m>:GND
<State>
Connects the signal to the ground.
Suffix:
<m>
.
1..4
Parameters:
<State>
ON | OFF
*RST:
OFF
CHANnel<m>:SCALe
<Scale>
Sets the vertical scale for the indicated channel.
Suffix:
<m>
.
1..4
Selects the input channel.
Parameters:
<Scale>
Scale value, given in Volts per division.
Range:
Depends on attenuation factors, coupling, and
instrument model, see below.
Increment: Depends on vertical and probe settings
*RST:
0.05
Default unit: V/div
Usage:
Asynchronous command
CHANnel<m>:RANGe
<Range>
Sets the voltage range across the 10 vertical divisions of the diagram. Use the com-
mand alternativly instead of
Suffix:
<m>
.
1..4
Selects the input channel.
Parameters:
<Range>
Voltage range value
Range:
Dependencies see below.
Increment: Depends on vertical and probe settings
*RST:
0.5
Default unit: V/div
Acquisition and setup
