Remote control commands
R&S
®
RTO6
1319
User Manual 1801.6687.02 ─ 05
Parameters:
<ClrMatchedMskBorder>
Decimal value corresponding to the ARGB hex value that is
shown in the "Color" dialog box. ARGB is a 32-bit unsigned inte-
ger with alpha, red, green, blue word order. Alpha defines the
transparency.
To get the value, covert the hex value from the dialog to decimal
value.
Range:
0 (black) to 4294967295 (white)
Increment: 1
*RST:
2580309606
Usage:
Asynchronous command
MTESt:COLor:INTerior
<ClrMatchedMskInterior>
Sets the color of mask segments the signal has entered into.
Parameters:
<ClrMatchedMskInterior>
Decimal value corresponding to the ARGB hex value that is
shown in the "Color" dialog box. ARGB is a 32-bit unsigned inte-
ger with alpha, red, green, blue word order. Alpha defines the
transparency.
To get the value, covert the hex value from the dialog to decimal
value.
Range:
0 (black) to 4294967295 (white)
Increment: 1
*RST:
2578055168
Usage:
Asynchronous command
24.7.3
Display
24.7.3.1
Persistence
.......................................................................................1319
.......................................................................................1320
..........................................................................................1320
........................................................................................ 1320
DISPlay:PERSistence[:STATe]
<State>
If enabled, each new data point in the diagram area remains on the screen for the
duration defined using
is enabled.
If disabled, the signal value is only displayed as long as it actually occurs.
Instrument setup
