Remote control commands
R&S
®
RTO6
1315
User Manual 1801.6687.02 ─ 05
24.7.2.9
Measurement appearance
MEASurement<m>:DISPlay:GROuping
<GroupResDialogs>
If ON, all measurement results are shown in one result box. If disabled, the results of
each measurement group are shown in a separate result box. The default position is
ignored.
Suffix:
<m>
.
1..10
The suffix is irrelevant. The setting affects all measurements
except for the peak list.
Parameters:
<GroupResDialogs> ON | OFF
*RST:
ON
Usage:
Asynchronous command
DISPlay:RESultboxes:MEPosition
<Position>
Defines the position of the measurement results on the display.
Parameters:
<Position>
PREV | FLOA | DOCK
PREV
Preview: result icon on the signal bar
FLOA
Floating: floating result box in front of the diagrams
DOCK
Docked: fixed tab below the diagrams
*RST:
DOCK
Usage:
Asynchronous command
24.7.2.10
Peak list appearance
MEASurement<m>:RESult:LABorder
<MeasType>, <FrameType>
MEASurement<m>:RESult:LABorder?
<MeasType>
Defines the layout of the labels.
Suffix:
<m>
.
1..10
See
"Selection of the measurement group: MEASurement<m>"
Parameters:
<FrameType>
NOBorder | UNDERLINE | FULL
NOBorder
Label without border or lines.
Instrument setup
