Remote control commands
R&S
®
RTO6
1297
User Manual 1801.6687.02 ─ 05
SYSTem:DEVice:ID?
Returns the instrument ID - that is the part number and the serial number.
Return values:
<ID>
String containing the part number and the serial number
Example:
1316.1000K24-001122-jT
Usage:
Query only
DIAGnostic:SERVice:COMPutername
<ComputerName>
The query returns the computer name that is currently defined. The computer name is
required when configuring a network.
The setting command changes the computer name. The change takes effect after the
next reboot of the computer.
Parameters:
<ComputerName>
Name string
Usage:
Asynchronous command
24.7.2
Appearance
24.7.2.1
Colors appearance
................................................................................1297
DISPlay:COLor:SIGNal<m>:ASSign
...............................................................................1297
...................................................................................1298
DISPlay:COLor:SIGNal<m>:COLor
<Value>
Suffix:
<m>
.
1...218
Waveform number, see
Chapter 24.4.1, "Waveform suffix"
Parameters:
<Value>
Decimal value of the ARGB color. Use the color dialog box on
the instrument to get the hex value of the color, and convert the
hex value to a decimal value.
0 is fully transparent black.
4278190080 (dec) = FF000000 (hex) is opaque black.
4294967295 (dec) = FFFFFFFF (hex) is opaque white.
DISPlay:COLor:SIGNal<m>:ASSign
<ColorTable>
Assigns the color table to the specified signal.
Instrument setup
