Remote control commands
R&S
®
RTO6
1259
User Manual 1801.6687.02 ─ 05
To find the appropriate command for a setting easily, you can use the context help:
1. Enable the "Help" icon on the toolbar.
2. Tap the parameter for which you need information.
The tooltip opens.
3. Tap the "Show Help" button in the lower right corner of the tooltip.
The "Help" window opens and displays the comprehensive description and the cor-
responding remote command.
4. Tap the remote command link to open the command description.
24.3
Programming examples
Some of the commands in the following chapter are asynchronous. An overlapping or
asynchronous command does not automatically finish executing before the next com-
mand starts executing. If overlapping commands must be executed in a defined order,
e.g. to avoid wrong measurement results, they must be serviced sequentially.
To prevent an overlapping execution of commands, one of the commands
*OPC
,
*OPC?
or
*WAI
can be used after the command or a command set.
For more information, see:
●
www.rohde-schwarz.com/rc-via-scpi
, chapter "Command Sequence and Synchro-
nization"
●
Chapter 24.3, "Programming examples"
24.3.1
24.3.1.1
24.3.1.2
24.3.2
24.3.2.1
24.3.2.2
24.3.2.3
24.3.2.4
24.3.3
24.3.3.1
24.3.4
24.3.4.1
24.3.5
Programming examples