R&S RTE Getting Started Download

Page: 18 / 121

Preparing for use

R&S

RTE

Getting Started 1326.1026.02 ─ 10

Preparing for use

Here, you can find basic information about setting up the instrument for the first
time or when changing the operating site.

4.1

Lifting and carrying

See:

"Lifting and carrying the instrument"

on page 8.

4.2

Unpacking and checking

1. Unpack the product carefully.

2. Retain the original packing material. Use it when transporting or shipping the

product later.

3. Using the delivery notes, check the equipment for completeness.

4. Check the equipment for damage.

If the delivery is incomplete or equipment is damaged, contact
Rohde

Schwarz.

4.3

Choosing the operating site

Specific operating conditions ensure proper operation and avoid damage to the
product and connected devices. For information on environmental conditions
such as ambient temperature and humidity, see the data sheet.

Summary of Contents for RTE


























































































































Search results

Summary of Contents for RTE

Reviews:

Related manuals for RTE

Brands by name

Popular brands

R&S RTE, Getting Started

Search results

Summary of Contents for RTE

Reviews:

Related manuals for RTE

Brands by name

Popular brands