![R&S RTA4000 User Manual Download Page 491](http://html2.mh-extra.com/html/rands/rta4000/rta4000_user-manual_3161987491.webp)
Remote control commands
R&S
®
RTA4000
491
User Manual 1335.7898.02 ─ 08
Parameters:
<DeltaLevel>
Range:
Lower limit depends on vertical scale and other set-
tings, no upper limit
*RST:
200 mV
SEARch:TRIGger:WIDTh:RANGe
<Range>
Sets how the measured pulse width is compared with the given limit(s).
.
.
Parameters:
<Range>
WITHin | OUTSide | SHORter | LONGer
WITHin
Finds pulses inside the range
width ± Δt
.
OUTSide
Finds pulses outside the range
width ± Δt
.
SHORter
Finds pulses shorter than the given width.
LONGer
Finds pulses longer than the given width.
*RST:
WITH
Example:
Chapter 17.2.3.1, "Searching for a pulse of specified width"
SEARch:TRIGger:WIDTh:WIDTh
<Width>
Sets the reference pulse width, the nominal value for comparisons.
Parameters:
<Width>
Default unit: s
Example:
Chapter 17.2.3.1, "Searching for a pulse of specified width"
SEARch:TRIGger:WIDTh:DELTa
<DeltaWidth>
Sets a range Δt to the reference pulse width set with
is set to
WITHin
or
OUTSide
.
Parameters:
<DeltaWidth>
Range:
Lower limit depends on the resolution, practically no
upper limit
Example:
Chapter 17.2.3.1, "Searching for a pulse of specified width"
Waveform analysis