![background image](http://html1.mh-extra.com/html/rands/rt-zc20b/rt-zc20b_user-manual_3247546009.webp)
Product description
R&S
®
RT-ZC20B
9
User Manual 1802.9967.02 ─ 01
2
Product description
The R&S
RT-ZC20B is an AC/DC current probe. It allows the user to make cur-
rent measurements from DC to 100
MHz. By clamping on the conductor to be
measured, the current waveform is captured easily without interrupting the elec-
tric circuit.
Since the probe is equipped with the Rohde
&
Schwarz probe interface, it can be
connected to any Rohde
&
Schwarz base unit that is compatible with this inter-
face. When connected to the front panel of a Rohde
&
Schwarz oscilloscope, the
probe is controlled using the software of the oscilloscope.
2.1
Key features
The R&S
RT-ZC20B is an AC/DC current probe. It allows the user to make cur-
rent measurements from DC to 100
MHz. By clamping on the conductor to be
measured, the current waveform is captured easily without interrupting the elec-
tric circuit.
Since the probe is equipped with the Rohde
&
Schwarz probe interface, it can be
connected to any Rohde
&
Schwarz base unit that is compatible with this inter-
face. When connected to the front panel of a Rohde
&
Schwarz oscilloscope, the
probe is controlled using the software of the oscilloscope.
The key features of the probe are the following:
●
Highly accurate current detection.
●
Easy current measurement without interrupting the electric circuit.
●
Broadband frequency characteristics DC to 100
MHz.
●
Permits measurement of low current levels.
●
Easy protection function to avoid self-heating during excessive input.
●
Unique thin film Hall effect element.
●
Rohde
&
Schwarz probe interface:
– Powered by the oscilloscope - no need for an additional power supply
– Remotely controlled by the oscilloscope
Key features