Remote control
R&S
®
QAT100
36
User Manual 1179.3073.02 ─ 02
Usage:
Query only
WRITe:MXINi
Writes the LAN settings to the non-volatile memory of the R&S
QAT and are therefore
kept after a restart of the R&S
QAT.
Example:
See
Usage:
Event
8.2.3
System configuration
HANDshake?
Queries the state of the handshake function.
Return values:
State
ON | OFF | 1 | 0
Example:
//Turn on handshake function and query state
HAND:ON
HAND?
Usage:
Query only
HANDshake:ON
HANDshake:OFF
Turns the handshake function on and off.
If on, a successful execution of a command that has no query is confirmed by a corre-
sponding message.
Example:
//Turn on handshake
HAND:ON
//Select transmit antenna
ANT:TX_A:ON 12
would return:
"TX_A 12 ON"<CR><LF>
Example:
//Turn off handshake
HAND:OFF
//Select transmit antenna
ANT:TX_A:ON 12
would return nothing
Remote control commands
