R&S NRX, Getting Started

Page: 11 / 25

Preparing for Use
R&S
®
NRX
9 Getting Started 1424.7070.02 ─ 04
4 Preparing for Use
● Unpacking and Checking .......................................................................................... 9
● Operating Conditions ................................................................................................ 9
● Important Aspects for Test Setup ............................................................................10
● Placing on a Bench Top .......................................................................................... 10
● Connecting to the AC Power Supply .......................................................................12
● Switching On or Off ................................................................................................. 12
● Connecting USB and External Devices ...................................................................13
● Connecting Power Sensors .....................................................................................13
4.1 Unpacking and Checking
Check the equipment for completeness using the delivery note and the accessory lists
for the various items. Check the R&S NRX for any damage. If there is damage, imme-
diately contact the carrier who delivered the R&S NRX. Make sure not to discard the
box and packing material.
Packing material
Retain the original packing material. If the instrument needs to be transported or ship-
ped later, you can use the material to protect the control elements and connectors.
4.1.1 Accessory List
The R&S NRX comes with the following accessories:
●
Printed getting started manual
●
Multilingual safety brochure
●
Additive data sheet ref. China ROHS
●
Country-specific power cable
4.2 Operating Conditions
Specific operating conditions are required to ensure accurate measurements and to
avoid damage to the R&S NRX and connected devices. Before switching on the R&S
NRX, observe the information on appropriate operating conditions provided in the basic
safety instructions and the data sheet of the R&S NRX.
In particular, ensure the following:
●
The R&S NRX is dry and shows no sign of condensation.
●
The ambient temperature does not exceed the range specified in the data sheet.
●
Signal levels at the input connectors are all within the specified ranges.
Operating Conditions