Getting Started
R&S
®
NRX
27
User Manual 1178.5566.02 ─ 07
Also displays status information:
●
Zeroing status
●
Sensor status
[System]
Opens the "System Overview" dialog.
Cursor keys
See (5) in
.
The cursor keys are context-sensitive. The control in focus is indicated by a focus
frame. Use the cursor keys as follows:
●
Selecting an element in the navigation pane.
●
Selecting the active pane.
●
Selecting an element from a list.
●
Moving the cursor in text boxes.
●
Changing the value of an entry in a text box.
3.2.1.5
USB Host Interface
See (6) in
.
USB 2.0 (universal serial bus) interface of the type A (host USB). Used to connect:
●
USB power sensors
●
External devices like a keyboard, mouse, or memory stick
Further information:
●
Chapter 3.1.8.4, "USB 2.0 Host Interfaces"
●
Chapter 3.1.9, "Connecting USB and External Devices"
3.2.1.6
On/Standby Key
See (7) in
.
The on/standby key toggles the R&S NRX between standby and ready state.
The following states are possible:
●
Off (key is not illuminated)
The AC power switch on the back of the R&S NRX is switched off. The R&S NRX
is disconnected from the AC power supply.
●
Ready (green)
The R&S NRX is ready for operation.
●
Standby (red)
The power supply has the operating voltage supplied to it. Thus, the R&S NRX is
still power-supplied.
Chapter 3.1.7, "Switching On or Off"
Instrument Tour
www.allice.de
Allice Messtechnik GmbH