R&S NRX Series, User Manual

Page: 128 / 514

Sensor Configuration
R&S
®
NRX
128 User Manual 1178.5566.02 ─ 07
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:PERiod
on page 356
Burst Width
Available if "User" is set under "Burst Mode" on page 127.
Sets the burst width.
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:WIDTh
on page 357
Direction
Defines how the forward power is determined.
"Auto" Determines the power flow direction automatically. The greater value
of two measured values is automatically assigned as forward power.
"1 > 2", "2 > 1" Sets a fixed direction of the forward power, either from port 1 to
port 2, or from port 2 to port 1.
The two ports are indicated on the directional power sensor.
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:DIRection
on page 357
INPut<Sensor>:PORT:SOURce:AUTO
on page 358
INPut<Sensor>:PORT:SOURce[:VALue]
on page 359
CCDF Threshold
Sets the threshold for the complementary cumulative distribution function, CCDF .
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:CCDF:THReshold
on page 357
PEP Hold Time
Sets the hold time of the peak hold circuit of the power sensor. See also Peak Enve-
lope Power (PEP) .
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:PEP:HOLD:TIME
on page 358
8.5.2 NRT Correction Settings
Access: "Measurement Main Configuration" > "Sensor Configuration" > "Correction"
NRT Measurement Type
www.allice.de Allice Messtechnik GmbH