R&S NRX-B4, User Manual

Page: 68 / 450

Measurement Types and Result Displays
R&S
®
NRX
68 User Manual 1178.5566.02 ─ 05
└ Trig Slope ........................................................................................................69
└ Level ............................................................................................................... 69
└ Sensor Trigger ................................................................................................ 69
Display
See Chapter 7.1, "Display Settings" , on page 46.
Pos / Scaling
Defines the effect of the cursor keys on the displayed trace.
"Pos"
Shifts the position. Press one of the cursor keys to shift the trace in x-
and y-direction.
"Scaling" Changes the scaling. Press one of the cursor keys to expand or com-
press the trace.
Autoscale
Adapts the scaling of the power axis to the trace. The scaling of the time axis is adap-
ted only if the power sensor supports it.
Info / Marker
Shows or hides additional information below the graph.
"Info" Displays measurement settings.
"Marker" Displays the marker results according to the set measurement, see
"Measurement Mode" on page 72. If you tap here, the "Trace
Marker" dialog opens, see Chapter 8.3.3, "Trace Marker Dialog" ,
on page 69.
Shows buttons to select a marker, see
"M1 / M2 / M3 / M4"
on page 68.
M1 / M2 / M3 / M4
Shows the selected marker in the trace.
Remote command:
DISPlay[:WINDow<Window>]:TRACe:MARKer<Undef>:SELection
on page 231
Trigger
Gives quick access to selected trigger settings.
Trace