Preparing for Use
R&S
®
NRPxxS(N)
15
User Manual 1177.5079.02 ─ 10
a) Connect the R&S NRP
‑
ZKU cable to the power sensor.
b) Connect the R&S NRP
‑
ZKU cable to the computer.
c) Connect the power sensor to the signal source.
2. On the computer, start a software application to view the measurement results.
Chapter 5, "Operating Concepts"
3.5.1.2
R&S NRP
‑
Z5 Sensor Hub Setup
The R&S NRP
‑
Z5 sensor hub (high-speed USB 2.0) can host up to four R&S
NRPxxS(N) power sensors and provides simultaneous external triggering to all con-
nected sensors.
Required equipment
●
1 to 4 R&S NRPxxS(N) power sensors
●
1 R&S NRP
‑
ZK6 cable per sensor
●
R&S NRP
‑
Z5 sensor hub with external power supply unit and USB cable
●
BNC cables to connect the trigger input and trigger output signals (optional)
Setup
TTL /CMOS
TTL /CMOS
NRP
3-P
ath
Dio
de P
ow
er
Sensor
MHz t
o G
Hz
, 100 pW t
o 200 mW
(−
70
dBm t
o +23 dBm)
SMA
RT S
EN
SOR TE
CHNOL
OG
Y
Figure 3-2: Setup with an R&S NRP-Z5 sensor hub
Connecting to a Computer
