R&S NGU, User Manual

Page: 87 / 214

Instrument functions
R&S
®
NGU
87 User Manual 1179.2531.02 ─ 03
5. Select the required action in the file manager dialog.
See Table 6-6 .
6. To view the selected file information, long-press on the selected filename in the file
manager dialog.
A pop-up message box is displayed with the file information.
Figure 6-57: File information
Table 6-6: File manager action
Action Description
Copy from internal memory to USB.
Copy from USB to internal memory.
Delete the selected file.
6.18 Store and recall
Upon power-up, the instrument loads the last stored settings from internal memory
location. Auto saved parameters are also applied during startup.
The R&S
NGU output state is disabled when the recall function is activated.
Auto saved instrument settings
Auto saved of the instrument settings is applied when any of the following parameters
are changed:
●
Chapter 6.20, "General instrument settings" , on page 99
●
USB connection mode
●
Ethernet settings
In addition of the auto saved instrument settings, the following instrument settings are
stored or recalled in the internal memory:
●
Set voltage and current level
●
Settings in the Protection Function , Safety Limits
●
Arbitrary settings , Ramp settings
Store and recall