R&S NGU, User Manual

Page: 137 / 214

Remote control commands
R&S
®
NGU
137 User Manual 1179.2531.02 ─ 03
0
Deactivates the selected channel.
1
Activates the selected channel.
*RST:
0
Parameters for setting and query:
<Channel list> <list>
Example: See Example "Activating the channels" on page 132
Example: OUTPut:SEL? (@1)
Queries output state at channel 1.
OUTPut:TRIGgered <arg0>
OUTPut:TRIGgered[:STATe] <arg0>[, <Channel list>]
OUTPut:TRIGgered[:STATe]? [<Channel list>]
Enables or disables the triggered event for output.
Setting parameters:
<arg0> 1
Trigger is enabled.
0
Trigger is disabled.
Parameters for setting and query:
<Channel list> <list>
Example: OUTP:TRIG 1
When a trigger event occurs, respective channel output is trig-
gered.
See
OUTPut:TRIGgered:BEHavior
on page 137.
Example: OUTPut:TRIG? (@1)
Queries trigger event for output at channel 1.
OUTPut:TRIGgered:BEHavior <arg0>[, <Channel list>]
OUTPut:TRIGgered:BEHavior? [<Channel list>]
Sets or queries output behavior when a trigger event occurs.
Setting parameters:
<arg0> ON | OFF | GATed | <list>
ON
Output is set on when a trigger event occurs.
OFF
Output is set off when a trigger event occurs.
GATed
Output is set gated when a trigger event occurs.
Configuration commands