Remote control commands
R&S
®
NGU
134
User Manual 1179.2531.02 ─ 03
OUTPut:DELay[:STATe]
<state>
OUTPut:DELay[:STATe]?
[<Channel list>]
Sets or queries the output delay state for the selected channel.
Parameters:
<state>
0
Deactivates output delay for the selected channel.
1
Activates output delay for the selected channel.
Parameters for setting and query:
<Channel list>
<list>
Example:
OUTPut:DELay 1
OUTPut:DELay?
-> 1
Returns output delay state as on.
Example:
OUTPut:DELay? (@1)
Returns output delay state at channel 1.
OUTPut:FTResponse
<state>
OUTPut:FTResponse?
[<Channel list>]
Sets or queries the fast transient response state.
Parameters:
<state>
0
Deactivates fast transient response.
1
Activates fast transient response.
Parameters for setting and query:
<Channel list>
<list>
Example:
OUTPut:FTResponse 1
OUTPut:FTResponse?
-> 1
Returns fast transient response state as on.
Example:
OUTPut:FTR? (@1)
Returns fast transient response state at channel 1.
OUTPut:IMPedance
<resistance>
OUTPut:IMPedance?
[<Channel list>]
Sets or queries source impedance for the signal specified in ohms.
Parameters:
<arg0>
<numeric value> | MIN | MINimum | MAX | MAXimum | DEF |
DEFault | <list>
<numeric value>
Numeric value of the impedance ohm.
Configuration commands
