Remote control commands
R&S
®
NGU
109
User Manual 1179.2531.02 ─ 03
SYSTem:BEEPer:PROTection:STATe
<arg0>
Enables or disables beep sound for "protection" alert.
Parameters:
<arg0>
1
Enables the "protection" beep sound, a single beep alert when a
fuse tripped occurs.
0
Disables the "protection" beep sound.
SYSTem:BEEPer:PROTection[:IMMediate]
Return a single "protection" beep sound immediately.
Usage:
Event
SYSTem:BEEPer:STATe
<Mode>
SYSTem:BEEPer:STATe?
Sets or queries the beeper tone.
Parameters:
<Mode>
1
Control beeper is activated.
0
Control beeper is deactivated.
Example:
SYSTem:BEEPer:STATe 1
The front panel control beeper is activated.
Example:
SYSTem:BEEPer:STATe?
Queries the state of the front panel control beeper. Returns “0”
for deactivated (OFF) and “1” for activated (ON) control beeper.
SYSTem:BEEPer:WARNing:STATe
<En-/Disable warning beep>
Enables or disables beep sound for errors and warnings.
Parameters:
<En-/Disable warning
beep>
ON | OFF
Example:
SYST:BEEP:WARN:STAT ON
Activates the beep sound for errors and warning.
SYSTem:BEEPer:WARNing[:IMMediate]
Sent a single error or warning beep immediately.
Usage:
Event
System settings commands
