R&S LCX Series User Manual Download

Page: 228 / 242

Glossary: List of the often used terms and abbreviations

R&S

LCX Series

228

User Manual 1179.2260.02 ─ 02

Line voltage:

AC voltage of the network.

Synonyms: Mains voltage

LXI:

LAN extensions for instrumentation: device platform for measuring instruments

and test equipment that is based on standard Ethernet technology.

MAC:

Media access control address: unique identifier of the network adapter in an

instrument.

mDNS:

Multicast

mDNS

: protocol that translates hostnames to IP addresses in small

networks which do not include a local server name.

OSA:

Open source acknowledgment documentation embedded in the instrument firm-

ware.

PC:

Personal computer

product page:

A designation of the R&S

LCX product page

http://www.rohde-

schwarz.com/product/LCX.html

Remote control:

The operation of the R&S

LCX by remote control commands or pro-

grams to perform automated tests.
The instrument is connected to a system controller via LAN/VXI-11, GPIB or USB using

VISA

. The instrument is controlled directly or supported by instrument drivers.

Remote device:

External device controls the R&S

LCX in remote operation mode, see

Remote operation.
Synonyms: External controller, client device

SCPI:

Standard commands for programmable instruments.

Serial number:

Unique instrument identification, provided on the rear panel of the

instrument and required to build the

Computer name

The serial number are the last 6 digits in the string

<stock no.>-<serial

number>

, e.g.

LCX100-123456

TCP/IP:

Transmission control protocol / Internet protocol for communication of devices

in a network (Internet or private network).

Summary of Contents for LCX Series



















































































































































































































































Search results

Summary of Contents for LCX Series

Reviews:

Related manuals for LCX Series

Brands by name

Popular brands

R&S LCX Series, User Manual

Search results

Summary of Contents for LCX Series

Reviews:

Related manuals for LCX Series

Brands by name

Popular brands