R&S FSW Series, User Manual

Page: 889 / 1450

Remote Commands
R&S
®
FSW
889 User Manual 1173.9411.02 ─ 43
CALCulate<n>:LIMit<li>:ACPower:GAP<gap>:ACLR:RESult?
The command returns the ACLR power limit check results for the selected gap channel
in an MSR ACLR measurement.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweep mode.
See also
INITiate<n>:CONTinuous
on page 835.
The results of the power limit checks are also indicated in the
STAT:QUES:ACPL
sta-
tus registry (see "STATus:QUEStionable:ACPLimit Register" on page 760).
Suffix:
<n>
.
1..n
<li> 1..n
irrelevant
<gap> 1 | 2
Gap (CACLR) channel number
Return values:
<LowerGap_AB>
<UpperGap_AB>
<LowerGap_BC>
<UpperGap_BC>
<LowerGap_CD>
<UpperGap_CD>
<LowerGap_DE>
<UpperGap_DE>
Example: INIT:IMM;*WAI;
CALC:LIM:ACP:GAP2:ACLR:RES?
PASSED,PASSED
Usage: Query only
CALCulate<n>:LIMit<li>:ACPower:GAP<gap>[:CACLr]:RESult?
The command returns the limit check results for the upper and lower gap (CACLR)
channels for the selected gap in an MSR ACLR measurement.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweep mode.
See also
INITiate<n>:CONTinuous
on page 835.
The results of the power limit checks are also indicated in the
STAT:QUES:ACPL
sta-
tus registry (see "STATus:QUEStionable:ACPLimit Register" on page 760).
Configuring and Performing Measurements