R&S FSW Series, User Manual

Page: 631 / 1450

Data Management
R&S
®
FSW
631 User Manual 1173.9411.02 ─ 43
For details, see Chapter 5.1.7, "Protecting Data Using the Secure User Mode" ,
on page 43.
Remote command:
MMEMory:CATalog
on page 1229
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005
.
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see Chapter 11.3.2.2, "Storage Location and
Filename" , on page 629.
Comment
An optional description for the data file. A maximum of 60 characters can be displayed.
Remote command:
MMEMory:COMMent
on page 1230
File Explorer
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
File Type
Determines whether the global instrument settings with all "Channel"s are stored or
recalled, or the current "Channel" settings only.
Items:
Defines which data and settings are stored or are recalled. Depending on the "File
Type", either channels only, or global settings are available. Which items are available
also depends on the installed options (see also
Chapter 11.3.2.1, "Stored Data Types" ,
on page 629).
Remote command:
MMEMory:SELect[:ITEM]:ALL
on page 1234
MMEMory:SELect[:ITEM]:DEFault
on page 1235
MMEMory:SELect[:ITEM]:NONE
on page 1236
MMEMory:SELect[:ITEM]:HWSettings
on page 1235
MMEMory:SELect[:ITEM]:LINes:ALL
on page 1235
MMEMory:SELect[:ITEM]:SGRam
on page 1236
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 1236
MMEMory:SELect[:ITEM]:TRANsducer:ALL
on page 1237
Save File
Saves the settings file with the defined filename.
Storing and Recalling Instrument Settings and Measurement Data