Remote Commands
R&S
®
FSW
1229
User Manual 1173.9411.02 ─ 43
........................................................................................1231
.................................................................................. 1232
.............................................................................................1233
.............................................................................. 1233
.................................................................................. 1233
FORMat:DEXPort:DSEParator
<Separator>
This command selects the decimal separator for data exported in ASCII format.
Parameters:
<Separator>
POINt | COMMa
COMMa
Uses a comma as decimal separator, e.g.
4,05
.
POINt
Uses a point as decimal separator, e.g.
4.05
.
*RST:
*RST has no effect on the decimal separator.
Default is POINt.
Example:
FORM:DEXP:DSEP POIN
Sets the decimal point as separator.
Manual operation:
See
"Saving the Result Summary (Evaluation List) to a File"
on page 267
See
See
See
MMEMory:CATalog
<arg0>
This command returns the contents of a particular directory.
Parameters:
<arg0>
String containing the path and directory
If you leave out the path, the command returns the contents of
the directory selected with
on page 1230.
The path may be relative or absolute. Using wildcards ('*') is
possible to query a certain type of files only.
If you use a specific file as a parameter, the command returns
the name of the file if the file is found in the specified directory,
or an error if the file is not found (
"-256,"File name not
found"
).
Managing Settings and Results
