R&S FSW Series, User Manual

Page: 396 / 1450

Common Measurement Settings
R&S
®
FSW
396 User Manual 1173.9411.02 ─ 43
Source State ............................................................................................................... 396
Source Power ..............................................................................................................396
Source Offset .............................................................................................................. 396
Source Frequency Coupling ........................................................................................397
(Manual) Source Frequency ........................................................................................397
(Automatic) Source Frequency (Numerator/Denominator/Offset) ...............................397
Result Frequency Start ............................................................................................... 398
Result Frequency Stop ................................................................................................398
Source State
Activates or deactivates control of an external generator.
Remote command:
SOURce<si>:EXTernal<gen>[:STATe]
on page 1098
Source Power
The output power of the external generator. The default output power is -20 dBm. The
range is specified in the data sheet.
Remote command:
SOURce<si>:EXTernal<gen>:POWer[:LEVel]
on page 1098
Source Offset
Constant level offset for the external generator. Values from -200 dB to +200 dB in 1
dB steps are allowed. The default setting is 0
dB. Offsets are indicated by the "LVL"
label in the channel bar (see also "Displayed Information and Errors" on page 392).
Data Input and Output