R&S FSW Series, User Manual

Page: 394 / 1450

Common Measurement Settings
R&S
®
FSW
394 User Manual 1173.9411.02 ─ 43
For more information on configuring interfaces, see Chapter 13.1.1, "Remote Control
Interfaces and Protocols" , on page 730.
Generator Type ........................................................................................................... 394
Interface ...................................................................................................................... 394
TTL Handshake ...........................................................................................................394
GPIB Address/TCPIP Address / Computer Name ...................................................... 394
Reference ....................................................................................................................395
Edit Generator Setup File ............................................................................................395
Frequency Min/ Frequency Max ..................................................................................395
Level Min/ Level Max .................................................................................................. 395
Generator Type
Selects the generator type and thus defines the generator setup file to use.
For an overview of supported generators, see "Overview of Supported Generators"
on page 385. For information on generator setup files, see "Generator Setup Files"
on page 386.
Remote command:
SYSTem:COMMunicate:RDEVice:GENerator<gen>:TYPE
on page 1101
Interface
Type of interface connection used.
For details on which signal generators support which interfaces, see the documenta-
tion of the corresponding signal generator.
●
GPIB
●
TCP/IP
Remote command:
SYSTem:COMMunicate:RDEVice:GENerator<gen>:INTerface
on page 1100
TTL Handshake
If available for the specified generator type, this option activates TTL synchronization
via handshake.
Using the TTL interface allows for considerably higher measurement rates, because
the frequency stepping of the R&S
FSW is directly coupled with the frequency stepping
of the generator.
For more information on TTL synchronization, see "TTL synchronization" on page 390.
For an overview of which generators support TTL synchronization see "Overview of
Supported Generators" on page 385.
Remote command:
SYSTem:COMMunicate:RDEVice:GENerator<gen>:LINK
on page 1100
GPIB Address/TCPIP Address / Computer Name
For LAN connections: TCP/IP address of the signal generator
For GPIB connections: GPIB address of the signal generator.
Data Input and Output