manualshive.com logo in svg

R&S FSW Series, User Manual, Page: 1373 / 1450

Share
Download
R&S FSW Series User Manual Download Page 1373

Remote Commands

R&S

®

FSW

1373

User Manual 1173.9411.02 ─ 43

HCOPy:ITEM:ALL

This command is maintained for compatibility reasons only. It has no effect.

SOURce<si>:EXTernal<gen>:FREQuency:SWEep[:STATe] 

<State>

Note that this command is maintained for compatibility reasons only. It is not required
in new remote control programs.

This command activates or deactivates the frequency sweep for the selected genera-
tor.

Suffix: 

<si>

.

irrelevant

<gen>

Parameters:

<State>

ON | OFF | 0 | 1

OFF | 0

Switches the function off

ON | 1

Switches the function on

Example: 

SOUR:EXT:FREQ:SWE ON

Activates the frequency sweep for the external generator.

SYSTem:COMPatible 

<Mode>

This command enables compatibility to other spectrum and signal analyzers by R&S.

Compatibility is necessary, for example, regarding the number of sweep points.

Note that this command is maintained for compatibility reasons only. Use the

SYST:LANG

 command for new remote control programs (see 

SYSTem:LANGuage

on page 1332).

Parameters:

<Mode>

DEFault | FSU | FSP | FSQ | FSV

Example: 

SYST:COMP FSP

TRIGger[:SEQuence]:BBPower:HOLDoff 

<Period>

This command defines the holding time before the baseband power trigger event.

The command requires the optional Digital Baseband Interface or the optional Analog
Baseband Interface.

Note that this command is maintained for compatibility reasons only. Use the

TRIGger[:SEQuence]:IFPower:HOLDoff

 

on page 1050 command for new remote

control programs.

Deprecated Commands

Summary of Contents for FSW Series











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments