R&S FSW-K7, User Manual

Page: 362 / 407

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
362 User Manual 1173.9240.02 ─ 23
Suffix:
<n>
.
Window
<k> Limit line
Parameters:
<Mode> ABSolute
Limit line is defined by absolute physical values.
The unit is variable.
RELative
Limit line is defined by relative values related to the reference
level (dB).
*RST:
ABSolute
Manual operation: See "X-Axis" on page 159
CALCulate<n>:LIMit<k>:UPPer:OFFSet <Offset>
This command defines an offset for a complete upper limit line.
Compared to shifting the limit line, an offset does not actually change the limit line defi-
nition points.
Suffix:
<n>
.
irrelevant
<k> Limit line
Parameters:
<Offset> Numeric value.
*RST:
0
Default unit: dB
Manual operation: See "Y-Offset" on page 157
CALCulate<n>:LIMit<k>:UPPer:SHIFt <Distance>
This command moves a complete upper limit line vertically.
Compared to defining an offset, this command actually changes the limit line definition
points by the value you define.
Suffix:
<n>
.
irrelevant
<k> Limit line
Parameters:
<Distance> Defines the distance that the limit line moves.
The unit depends on
CALCulate<n>:LIMit<k>:UNIT
on page 360.
Usage: Event
Manual operation: See "Shift y" on page 160
Analyzing Results