R&S FSW-K7, User Manual

Page: 144 / 407

Analysis
R&S
®
FSW-K7
144 User Manual 1173.9240.02 ─ 23
Remote command:
CALCulate<n>:MARKer<m>:PEXCursion
on page 338
6.3.2.2 Positioning Functions
Access : MKR ->
The following functions set the currently selected marker to the result of a peak search
or set other characteristic values to the current marker value.
Select Marker .............................................................................................................. 144
Peak Search ................................................................................................................144
Search Next Peak ....................................................................................................... 144
Search Minimum ......................................................................................................... 145
Search Next Minimum .................................................................................................145
Select Marker
The "Select Marker" function opens a dialog box to select and activate or deactivate
one or more markers quickly.
Remote command:
CALCulate<n>:MARKer<m>[:STATe]
on page 320
CALCulate<n>:DELTamarker<m>[:STATe]
on page 324
Peak Search
Sets the selected marker/delta marker to the maximum of the trace. If no marker is
active, marker 1 is activated.
Remote command:
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]
on page 339
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
on page 342
Search Next Peak
Sets the selected marker/delta marker to the next (lower) maximum of the assigned
trace. If no marker is active, marker 1 is activated.
Working with Markers in the R&S FSW Analog Demodulation application