R&S FSW-K7, User Manual

Page: 128 / 407

Configuration
R&S
®
FSW-K7
128 User Manual 1173.9240.02 ─ 23
Online Demodulation Output State ............................................................................. 128
Output Selection ..........................................................................................................128
AF Coupling ................................................................................................................ 128
AC Cutoff Frequency ...................................................................................................129
Phones Output ............................................................................................................ 129
Online Demodulation Output State
Enables or disables online demodulation output. If enabled, the demodulated audio fre-
quencies are output to the IF/VIDEO/DEMOD output connector on the rear panel of the
R&S
FSW.
Optionally, you can output the demodulated signal to the PHONES connector on the
front panel (see
"Phones Output" on page 129).
Remote command:
OUTPut:ADEMod[:ONLine][:STATe]
on page 240
SYSTem:SPEaker:VOLume
on page 241
Output Selection
Selects the result display whose results are output. Only time domain results can be
selected. All currently active time domain result displays are listed.
"Current Focus" dynamically switches to the currently selected window. Thus you can
easily change the output signal simply by selecting the windows in the display. If a win-
dow is selected that does not contain a time-domain result display, the selection is
ignored and the previous setting is maintained.
The result display currently used for output is indicated by a "Demod Out" label in the
window title bar.
Remote command:
OUTPut:ADEMod[:ONLine]:SOURce
on page 240
AF Coupling
Controls the automatic correction of the frequency offset and phase offset of the input
signal:
This function is only available for FM or PM time domain evaluations.
●
FM time evaluation
Output Settings