Welcome to the I/Q Analyzer Application
R&S
®
FSV/A3000 I/Q
Analyzer
10
User Manual 1178.8536.02 ─ 01
The R&S
FSV/A opens a new channel for the I/Q Analyzer application.
The measurement is started immediately with the default settings.
It can be configured in the I/Q Analyzer "Overview" dialog box, which is displayed
when you select the "Overview" softkey from any menu (see
Multiple Channels and Sequencer Function
When you activate an application, a new channel is created which determines the
measurement settings for that application (channel). The same application can be acti-
vated with different measurement settings by creating several channels for the same
application.
The number of channels that can be configured at the same time depends on the avail-
able memory on the instrument.
Only one measurement can be performed at any time, namely the one in the currently
active channel. However, in order to perform the configured measurements consecu-
tively, a Sequencer function is provided.
If activated, the measurements configured in the currently defined channels are per-
formed one after the other in the order of the tabs. The currently active measurement is
indicated by a symbol in the tab label.
The result displays of the individual channels are updated in the tabs (as well as the
"MultiView" ) as the measurements are performed. Sequential operation itself is inde-
pendent of the currently
displayed
tab.
For details on the Sequencer function see the R&S
FSV/A User Manual.
2.2
Understanding the Display Information
The following figure shows a measurement diagram during I/Q Analyzer operation. All
different information areas are labeled. They are explained in more detail in the follow-
ing sections.
Understanding the Display Information