R&S FSV-K7, Operating Manual, Page: 87 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
87 Operating Manual 1176.7561.02 ─ 06
Usage: Query only
Mode: ADEMOD
CALCulate<n>:MARKer:FUNCtion:ADEMod:CARRier[:RESult<t>]?
This command queries the carrier power.
With RF Power result display, the carrier power is determined from trace 1 to 6 indica-
ted in the suffix. With all other result displays, the carrier power is determined from the
current trace data (CLR/WRITE trace).
Suffix:
<n>
.
1...4
irrelevant
<t> 1...6
irrelevant
Example:
ADEM ON
(see
[SENSe:]ADEMod[:STATe]
on page 121)
Switches on analog demodulator
CALC:FEED 'XTIM:RFP'
, see
CALCulate<n>:FEED
on page 90
Switches on RF power result display
CALC:MARK:FUNC:ADEM:CARR?
Queries the carrier power
Usage: Query only
Mode: ADEMOD
CALCulate<n>:MARKer:FUNCtion:ADEMod:FERRor[:RESult<t>]?
This command queries the frequency error with FM and PM demodulation. The fre-
quency error is determined from the current measurement data (CLR/WRITE trace).
The offset thus determined differs from that calculated in the
[SENSe:]ADEMod:FM:
OFFSet
on page 132 command since, for determination of the frequency deviation,
the modulation is removed by means of low pass filtering, producing results that are
different from those obtained by averaging with the SENSe command.
Suffix:
<n>
.
1...4
irrelevant
<t> 1...6
irrelevant
Remote Commands of the Analog Demodulation (R&S FSV–K7)