Analog Demodulation Option R&S
FSV–K7
R&S
®
FSV-K7/K7S
63
Operating Manual 1176.7561.02 ─ 06
ASCII Trace Export
Opens the "ASCII Trace Export Name" dialog box and saves the active trace in ASCII
format to the specified file and directory.
Tip
: You can export a single trace ("ASCII Trace Export Trace (x)" softkey) or all traces
at the same time ("ASCII Trace Export All Traces"). When you use single trace export,
the R&S
FSVA/FSV exports the currently selected trace (indicated by the softkey
label). Note that the exported ASCII file has a slightly different structure compared to a
single trace export.
The file consists of the header containing important scaling parameters and a data sec-
tion containing the trace data. For details on an ASCII file see
This format can be processed by spreadsheet calculation programs, e.g. MS-Excel. It
is necessary to define ';' as a separator for the data import. Different language versions
of evaluation programs may require a different handling of the decimal point. It is there-
fore possible to select between separators '.' (decimal point) and ',' (comma) using the
"Decim Sep" softkey (see
Remote command:
Decim Sep
Selects the decimal separator with floating-point numerals for the ASCII Trace export
to support evaluation programs (e.g. MS-Excel) in different languages. The values '.'
(decimal point) and ',' (comma) can be set.
Remote command:
2.2.9
Softkeys of the Trigger Menu – TRIG Key (Analog Demodulation)
The following table shows all softkeys available in the "Trigger" menu in "Analog
Demodulation" mode (TRIG key). It is possible that your instrument configuration does
not provide all softkeys. If a softkey is only available with a special option, model or
(measurement) mode, this information is delivered in the corresponding softkey
description.
Softkeys of the Analog Demodulation option