Getting Started
R&S
®
FSPN
38
User Manual 1179.4363.02 ─ 01
................................................................................... 39
..............................................................................................40
3.2.2.1
Removable Hard Disk
The removable hard disk is accessible from the rear of the instrument.
In addition to the operating system and the firmware, the R&S
FSPN also stores mea-
surement data on that disk. When you remove the hard disk, you can store it and the
data on it somewhere secure.
3.2.2.2
AC Power Supply Connection and Main Power Switch
An AC power supply connector and main power switch are located in a unit on the rear
panel of the instrument.
Main power switch function:
Position 1: The instrument can be started via the Power key on the front panel.
The OCXO reference frequency is warmed up.
Position O: The entire instrument is disconnected from the AC power supply.
3.2.2.3
Display Port and DVI
You can connect an external monitor or other display device to the R&S
FSPN to pro-
vide an enlarged display. Two different types of connectors are provided for this pur-
pose:
●
Display Port
●
DVI (digital visual interface)
For details, see
Chapter 3.1.9, "Connecting an External Monitor"
3.2.2.4
LAN
The R&S
FSPN is equipped with a 1
GBit Ethernet IEEE 802.3u network interface with
Auto-MDI(X) functionality. The assignment of the RJ-45 connector supports twisted-
pair category 5 UTP/STP cables in a star configuration (UTP stands for
unshielded
twisted pair
, and STP for
shielded twisted pair
).
For details, see
Chapter 10, "Network and Remote Operation"
3.2.2.5
USB Ports
The four USB ports on the rear panel (type A) allow you to connect devices like key-
boards, mouses or memory sticks.
Instrument Tour