R&S FSMR3000, User Manual, Page: 539 / 733

Remote Commands
R&S
®
FSMR3000
539 User Manual 1179.0116.02 ─ 02
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X?
This command queries the position of the peaks on the x-axis.
The order depends on the sort order that has been set with
CALCulate<n>:
MARKer<m>:FUNCtion:FPEaks:SORT
.
Suffix:
<n>
.
irrelevant
<m> irrelevant
Return values:
<PeakPosition> Position of the peaks on the x-axis. The unit depends on the
measurement.
Usage: Query only
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?
This command queries the position of the peaks on the y-axis.
The order depends on the sort order that has been set with
CALCulate<n>:
MARKer<m>:FUNCtion:FPEaks:SORT
.
Suffix:
<n>
.
irrelevant
<m> irrelevant
Return values:
<PeakPosition> Position of the peaks on the y-axis. The unit depends on the
measurement.
Usage: Query only
12.6.4.9 Marker Demodulation
The following commands control the demodulation of AM and FM signals at the marker
position.
Remote commands exclusive to marker demodulation:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:CONTinuous
....................................539
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLDoff
..........................................540
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
............................................540
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
........................................... 541
[SENSe:]DEMod:SQUelch:LEVel
.....................................................................................541
[SENSe:]DEMod:SQUelch[:STATe]
.................................................................................. 541
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:CONTinuous <State>
This command turns continuous demodulation of the signal at the marker position in
the frequency domain on and off.
Analyzing Measurements (Basics)