Remote Commands
R&S
®
FSMR3000
497
User Manual 1179.0116.02 ─ 02
Example:
CALC:MATH:POS 100
Moves the trace to the top of the diagram area.
CALCulate<n>:MATH<t>:STATe
<State>
This command turns the trace mathematics on and off.
Suffix:
<n>
.
<t>
irrelevant
Parameters:
<State>
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:MATH:STAT ON
Turns on trace mathematics.
12.6.2.4
Retrieving Trace Results
This chapter describes how to retrieve data from standard traces.
For details on the format of the retrieved trace data see also
mats for Returned Values: ASCII Format and Binary Format"
.......................................................................................... 498
FORMat[:DATA]
<Format>[, <BitLength>]
This command selects the data format that is used for transmission of trace data from
the R&S
FSMR3 to the controlling computer.
Note that the command has no effect for data that you send to the R&S
FSMR3. The
R&S
FSMR3 automatically recognizes the data it receives, regardless of the format.
Parameters:
<Format>
ASCii
ASCii format, separated by commas.
This format is almost always suitable, regardless of the actual
data format. However, the data is not as compact as other for-
mats may be.
Analyzing Measurements (Basics)
