R&S FSMR3000, User Manual

Page: 460 / 733

Remote Commands
R&S
®
FSMR3000
460 User Manual 1179.0116.02 ─ 02
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y[:SCALe]:RVALue <Value>
This command defines the reference value assigned to the reference position in the
specified window. Separate reference values are maintained for the various displays.
Suffix:
<n>
.
Window
<w> subwindow
<t> irrelevant
Parameters:
<Value> Default unit: DB
Example: DISP:TRAC:Y:RVAL 0
Sets the value assigned to the reference position to 0 Hz
Manual operation: See "Reference Value" on page 166
12.5.7.7 Scaling for RF Evaluation
These commands are required for RF evaluations and the result summary.
●
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition
on page 435
●
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y:SPACing
on page 435
●
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 434
●
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y[:SCALe]:MODE
on page 434
12.5.7.8 Units
The units define how the demodulated data is displayed.
UNIT<n>:ANGLe
............................................................................................................460
UNIT<n>:THD
................................................................................................................461
UNIT<n>:ANGLe <Unit>
This command selects the unit for angles (for PM display, <n> is irrelevant).
This command is identical to
CALC:UNIT:ANGL
Suffix:
<n>
.
Window
Parameters:
<Unit> DEG | RAD
*RST:
RAD
Example: UNIT:ANGL DEG
Manual operation: See "Phase Unit (Rad/Deg)" on page 167
Configuring the Measurement