Network Operation and Remote Control
R&S
®
FSMR3000
344
User Manual 1179.0116.02 ─ 02
Settings
Some additional settings are available to configure the exported SCPI command files.
Add Synchronization Commands ← Settings
If enabled, additional commands are included in the script to synchronize the recorded
commands when necessary. For instance, when a measurement is started, a
*WAI
command is inserted to ensure that the next command is only executed after the mea-
surement has finished.
11.5.3
How to Determine the Required SCPI Command
The SCPI Recorder provides information on the required SCPI command for the avail-
able measurement settings, functions, and results in a context-sensitive menu.
1. Define the setting or navigate to the function you need the SCPI command for.
To find the query command for trace or marker results, select the result diagram.
2. On the screen, tap and hold, or right-click the measurement setting, function, or
result display.
The context-sensitive menu for that particular setting, function, or result is dis-
played.
Tip:
If the SCPI command menu is not displayed, you probably tapped outside of a
softkey or input field, for example in a block diagram. Tap within the corresponding
softkey, button or input field, or in a result display, to display the context-sensitive
SCPI command menu.
3. Select "Show SCPI result query commands" or "Show SCPI command", depending
on which item you selected.
A dialog box with the required command and some functions is displayed.
Automating Tasks with Remote Command Scripts
